The cap-ONE sensor has achieved an extremely light and small size with a weight of 4 mg and the dead space of 0.5 mL with infant airway adapter. Also, by using anti-fogging membrane, neither motor nor heater is required. cap-ONE is highly durable-withstands a drop test of 100 falls from a height of 2 m, a flex test of 5000 times with a 400 g load, and a water test with a 1 m for 30 minutes (IPX-7).
No Calibration and No Warm-up
Nihon Kohden’s mainstream CO2 sensors have a dedicated airway adapter with a unique anti-fogging membrane and no heater. After connecting the CO2 sensor, you can start CO2 measurement in just 5 seconds with no calibration or warm-up time.
Though typical membranes on adapter cause water drops, our technology provide a reliable CO2 wave even under high humidity condition because of state of the arts technology of anti-fogging membrane.
Fast response with small lag time
Expose the CO2 sensor to the air and calibrate it with the connected airway adapter.
cap-ONE performs with greater precision than side stream monitoring for nonintubated children (*1)
If you need more detailed information, please see the link.
Reference (*1)
Mainstream capnography system for nonintubated children in the postanesthesia care unit: Performance with changing flow rates, and a comparison to side stream capnography. Nagoshi M, Morzov R, Hotz J, Belson P, Matar M, Ross P, Wetzel R. Paediatr Anaesth. 2016 Dec;26 (12):1179-1187